home *** CD-ROM | disk | FTP | other *** search
- Path: news.mcs.net!usenet
- From: kanep@mcs.com (Kane Peterson)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Pinnacle RCD1000 & Fastlane Z3
- Date: 18 Feb 1996 22:32:08 GMT
- Organization: MCSNet Internet Services
- Message-ID: <1040.6622T983T283@mcs.com>
- References: <4ftf0j$o62@catapult.gatech.edu> <1626.6620T1229T769@ping.be> <900.6622T832T23@jytol.fi>
- NNTP-Posting-Host: kanep.pr.mcs.net
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
-
- >>Well a few days agoo MasterISO arrived...
- >>Though we are not yet in possesion of a CDrec... we can't test to be sure...
- >>But the Manual tells you need Min: A4000 3.x + Fastlane (WarpEngine or
- >>A4091) for HD you must have; Seagate Barracuda or a Large IDE HD. Would a
- >>A3000 Do the Job ???? Following the manual NOT!
-
- >What ?!? I have write a few CD's on A3000, 1GB Seagate Medalist, and 1GB
- >Seagake Hawk, 3.x OS and 10MB memory. And MasterISO works fine.
-
- From what I have heard. MasterISO will work with more than what is listed in
- the manual. The manual only lists _tested_ configurations, but A3000 and
- A2000 systems should be able to use it as well. The important part is that
- you need a good SCSI controller (no 2090A), and a fast hard drive.
-
-
- Kane --------------------------------------------
- Peterson -- "Kane's World" World Wide Web Home Page: --
- -- http://www.mcs.net/~kanep/www/ --
- kanep@mcs.com --------------------------------------------
-
-